ARTeMIS Modal Pro - Plugin Modules for Structural Health Monitoring
Using the Application > Working with Application Tasks > ARTeMIS Modal Pro - Plugin Modules for Structural Health Monitoring

ARTeMIS Modal Pro has a series of plugin modules that are designed for Structural Health Monitoring (SHM). Below, the modules are presented using measurements from the Dogna Bridge case study. The organization of the modules is shown in figure 1 below. 

Figure 1: Organization of the plugin modules for ARTeMIS Modal Pro. There are basically four modules that perform different types of analysis on long-term measurements that all rely on the same Data Manager Base Module.

Data Manager Base Module

Each recorded measurement file is uploaded into an Analysis Session that is the container for the particular measurements and the results obtained from it. The Data Manager Base Module is responsible for the administration of the Analysis Sessions. It stores and retrieves the different Analysis Sessions when requested by the analysis modules. The Data Manager extends the ARTeMIS Modal Pro platform that basically only handles a single Analysis Session.



Damage Detection Module

The Damage Detection module consists of two different damage detection algorithms that have been developed for long-term monitoring of structures. The algorithms are robust to the natural change of a structure's dynamic behavior due to the changes of ambient conditions and can be set up to not reacting on such changes. The plugin also includes a Control Chart that, as input, can take a user-definable set of damage indicators and unify them to a single control value with corresponding statistical based threshold. This control chart can automatically notify (alert) when the threshold is being passed after an analysis. The notification can be sounds, emails or web service calls to third party systems.

In figure 2, the damage detection is demonstrated using the Dogna Bridge case study data. The bridge was measured for a period before damaging it. There are eight reference measurements that are presented by the first eight green vertical bars in the diagram. The level of these bars shows the level of the damage indicators under normal conditions. From the first six measurements, a baseline (reference) model is determined by the module, and a threshold is automatically estimated based on the statistical evaluation of the damage indices of the six reference measurements. As seen, the last two reference measurements stay under the threshold which indicates that the bridge is still undamaged. The remaining 14 measurements are all acquired after the bridge experienced damage, and the associated damage indicators all pass the threshold significantly and indicate a permanent damage.

Figure 2: Damage Detection of the Dogna Bridge data. 8 reference (undamaged) measurements indicated with the green vertical bars staying below the thresholds. 14 measurements of the damaged bridge that all pass the thresholds significantly.

The graphics of the Damage Detection Module can be dumped to the report generator of ARTeMIS Modal Pro that allows the production of a report with a consistent customizable layout. Features:


Modal Parameter History Module

Similar to the Damage Detection Module, the modes of the structure can be presented in a historical view. The Modal Parameter History Module has been designed for this. It presents the modal parameters as a function of the Analysis Sessions. In addition, it can automatically track modes determined in a reference state. Even though they change slightly in subsequent Analysis Sessions, the Mode Tracking is capable of keeping track of them. The tracked modes are presented as modal indicators that are inter-connected.Pointing at the line with the mouse allows further information of the particular tracked mode.

In figure 3 below, the natural frequency of three tracked modes is presented. The two first modes are reasonable unaffected by the damage whereas the third mode is heavily influenced and even disappears for a while when damage occurs.

Figure 3: Modal Parameter History with automatic Mode Tracking of three modes. The natural frequency of the first two modes is quite unaffected by the damage. The third mode changes and disappears completely during the first set of damage measurement and reappears again later.

 Clicking on a specific indicator in the diagram will present the corresponding mode in the Modes List of the Analysis Sessions and start an animation of its mode shape, see figure 4 below.

Figure 4: Clicking a specific mode indicator will display it in the list of modes of the specific Analysis Session and start an animation of its mode shape.

As shown below in figure 5, the Mode Tracking can also be presented in terms of other modal parameters such as the damping ratios and mode shapes. In case of the mode shapes, it will be the Modal Assurance Criterion between the reference state mode shape and the mode shape of the different Analysis Sessions.


Figure 5: Mode Tracking of three modes presented in terms of the change of the Modal Assurance Criterion of the modes between the reference state and the current state. The highlighted mode is the third mode that also has a significant change of the MAC value as damage occurs.

 There is an export facility that allows the saving of all the modes presented in the Modal Parameter History window and specific export of the tracked modes. The graphics of the Modal Parameter History module can be dumped to the report generator of ARTeMIS Modal Pro that allows the production of a report with a consistent customizable layout.


Drift Analysis Module

The Drift Analysis Module is designed to analyze inter story drift based on measurements from sensors located at the top and bottom of structural elements. These elements can e.g. be columns. If the drift exceeds a certain percentage of the distance between the sensor locations, the module will automatically alert in terms of sounds, email or web service calls.


Data Acquisition Module

The Data Acquisition Module is designed to automatically upload and process measurement files arriving in designated file folder on the user network. It is possible to configure the file location and file type as well as the type of processing that should be initiated after file upload. The module allows ARTeMIS Modal Pro to fully plug into any third party physical data acquisition system and to perform automatic data analysis using any of the above-mentioned analysis modules as well as the native Operational Modal Analysis techniques of ARTeMIS Modal Pro.


See Also